Users Guide

Table Of Contents
Modifying thermal settings using RACADM
To modify the thermal settings, use the objects in the system.thermalsettings group with the set sub command as provided
in the following table.
Table 10. Thermal Settings
Object Description Usage Example
AirExhaustTemp
Allows you to set the
maximum air exhaust
temperature limit.
Set to any of the following
values (based on the system):
0 Indicates 40°C
1 Indicates 45°C
2 Indicates 50°C
3 Indicates 55°C
4 Indicates 60°C
255 Indicates 70°C
(default)
To check the existing setting
on the system:
racadm get
system.thermalsetti
ngs.AirExhaustTemp
The output is:
AirExhaustTemp=70
This output indicates that the
system is set to limit the air
exhaust temperature to 70°C.
To set the exhaust
temperature limit to 60°C:
racadm set
system.thermalsetti
ngs.AirExhaustTemp
4
The output is:
Object value
modified
successfully.
If a system does not
support a particular air
exhaust temperature limit,
then when you run the
following command:
racadm set
system.thermalsetti
ngs.AirExhaustTemp
0
The following error message is
displayed:
ERROR: RAC947:
Invalid object
value specified.
Make sure to specify the
value depending on the type
of object.
For more information, see
RACADM help.
64
Setting up managed system