Users Guide

Table Of Contents
Disabling warning messages while launching virtual console or
virtual media using Java or ActiveX plug-in
You can disable the warning messages while launching the Virtual Console or Virtual Media using Java plug-in.
NOTE: You need Java 8 or later to use this feature and to launch iDRAC Virtual Console over an IPv6 network.
1. Initially, when you launch Virtual Console or Virtual Media using Java plug-in, the prompt to verify the publisher is displayed.
Click Yes.
A certificate warning message is displayed indicating that a trusted certificate is not found.
NOTE: If the certificate is found in the operating system’s certificate store or if it is found in a previously specified user
location, then this warning message is not displayed.
2. Click Continue.
The Virtual Console Viewer or Virtual Media Viewer is launched.
NOTE: The Virtual Media viewer is launched if Virtual Console is disabled.
3. From the Tools menu, click Session Options and then Certificate tab.
4. Click Browse Path, specify the location to store the user’s certificate, click Apply, click OK, and exit from the viewer.
5. Launch Virtual Console again.
6. In the certificate warning message, select the Always trust this certificate option, and then click Continue.
7. Exit from the viewer.
8. When you re-launch Virtual Console, the warning message is not displayed.
Using virtual console viewer
The Virtual Console Viewer provides various controls such as mouse synchronization, virtual console scaling, chat options,
keyboard macros, power actions, next boot devices, and access to Virtual Media. For information to use these features, see the
iDRAC Online Help.
NOTE: If the remote server is powered off, the message No Signal is displayed.
The Virtual Console Viewer title bar displays the DNS name or the IP address of the iDRAC you are connected to from the
management station. If iDRAC does not have a DNS name, then the IP address is displayed. The format is:
For rack and tower servers:
<DNS name / IPv6 address / IPv4 address>, <Model>, User: <username>, <fps>
For blade servers:
<DNS name / IPv6 address / IPv4 address>, <Model>, <Slot number>, User: <username>, <fps>
Sometimes the Virtual Console Viewer may display low quality video. This is due to slow network connectivity that leads to
loss of one or two video frames when you start the Virtual Console session. To transmit all the video frames and improve the
subsequent video quality, do any of the following:
In the System Summary page, under Virtual Console Preview section, click Refresh.
In the Virtual Console Viewer, under Performance tab, set the slider to Maximum Video Quality.
eHTML5 based virtual console
NOTE:
While using eHTML5 to access virtual console, the language must be consistent across client and target keyboard
layout, OS, and browser. For example, all must be in English (US) or any of the supported languages.
To launch the eHTML5 virtual console, you must enable the virtual console feature from the iDRAC Virtual Console page and set
the Plug-in Type option to eHTML5.
NOTE: By default the virtual console type is set to eHTML5.
You can launch virtual console as a pop-up window by using one of the following methods:
From iDRAC Home page, click the Start the Virtual Console link available in the Console Preview session
278
Configuring and using virtual console