Configuration manual

36 Configuration Guide
5
If a cascade switch was detected, the
Enter Cascade Switch Information
dialog box appears. Select the type of switch connected to the appliance
from the drop-down list. If the type you are looking for is not available, you
can add it by clicking
Add
.
6
Click
Next
. The completion dialog box appears.
FlexAddress
FlexAddress allows you to replace the factory-assigned World Wide
Name/Media Access Control (WWN/MAC) ID with a WWN/MAC ID that
is persistent and mapped to a particular chassis slot. If you purchase
FlexAddress with your chassis, it will be installed and active when you power
up your system. If you purchase FlexAddress at a later date, you must install
the SD feature card using the instructions in the CMC Secure Digital (SD)
Card Technical Specification document. See support.dell.com for this
document.
For complete information on using the FlexAddress feature, click the Help
link in the CMC Web interface, or review the "Using FlexAddress" chapter of
the CMC User’s Guide.
U003Cbk0.book Page 36 Wednesday, July 30, 2008 12:19 PM