CLI Reference Guide

42 Command Groups
www.dell.com | support.dell.com
OSPFv3 Commands
trapflags Enables OSPF traps. ROSPF
1583compatibility Enables OSPF 1583 compatibility. ROSPF
*NOTE: For the meaning of each Mode abbreviation, see Mode Types on page 4.
Command Description Mode*
area default-cost Configures the monetary default cost for the stub area. ROSV3
area nssa Configures the specified areaid to function as an NSSA. ROSV3
area nssa default-info-originate Configures the metric value and type for the default route
advertised into the NSSA.
ROSV3
area nssa no-redistribute Configures the NSSA ABR so that learned external routes
will not be redistributed to the NSSA.
ROSV3
area nssa no-summary Configures the NSSA so that summary LSAs are not
advertised into the NSSA.
ROSV3
area nssa translator-role Configures the translator role of the NSSA. ROSV3
area nssa translator-stab-intv Configures the translator stability interval of the NSSA. ROSV3
area range Creates an area range for a specified NSSA. ROSV3
area stub Creates a stub area for the specified area ID. ROSV3
area stub no-summary Disables the import of Summary LSAs for the stub area
identified by areaid.
ROSV3
area virtual-link Creates the OSPF virtual interface for the specified areaid
and neighbor.
ROSV3
area virtual-link dead-interval Configures the dead interval for the OSPF virtual interface
on the virtual interface identified by areaid and neighbor.
ROSV3
area virtual-link hello-interval Configures the hello interval for the OSPF virtual interface
on the virtual interface identified by areaid and neighbor.
ROSV3
area virtual-link retransmit-
interval
Configures the retransmit interval for the OSPF virtual
interface on the virtual interface identified by areaid and
neighbor.
ROSV3
area virtual-link transmit-delay Configures the transmit delay for the OSPF virtual
interface on the virtual interface identified by areaid and
neighbor.
ROSV3
default-information originate Controls the advertisement of default routes. ROSV3
Command Description Mode*