CLI Reference Guide

706 OSPF Commands
www.dell.com | support.dell.com
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
Information is only displayed if OSPF is enabled.
Example
The following example displays information about the link state database when OSPF is
enabled.
console#show ip ospf database router 10 adv-router 192.168.7.7
The Link State Database is empty.
show ip ospf database database-summary
Use the show ip ospf database database-summary command in Privileged EXEC mode to display
the number of each type of LSA in the database for each area and for the router. The command also
displays the total number of LSAs in the database.
Syntax
show ip ospf database database-summary
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example displays the number of each type of LSA in the database for each area
and for the router.
console#show ip ospf database database-summary
OSPF Router with ID (5.5.5.5)
Area 0.0.0.0 database summary
Router......................................... 0