CLI Reference Guide

670 Multicast Commands
www.dell.com | support.dell.com
show ip mcast mroute source
Use the show ip mcast mroute source command in Privileged EXEC mode to display the multicast
configuration settings such as flags, timer settings, incoming and outgoing interfaces, RPF
neighboring routers, and expiration times of all the entries in the multicast mroute table
containing the
sourceipaddr or sourceipaddr | groupipaddr pair value(s).
Syntax
show ip mcast mroute source sourceipaddr {summary | groupipaddr }
• sourceipaddr — IP address of source.
•
groupipaddr — IP address of multicast group.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example displays multicast configuration settings.
console#show ip mcast mroute source 10.1.1.1 summary
Multicast Route Table Summary
Incoming Outgoing
Source IP Group IP Protocol Interface Interface List
---------- --------------- --------- --------- ----------------
console#show ip mcast mroute source 10.1.1.1 224.5.5.5
Multicast Route Table
Expiry Up Time
Source IP Group IP Time(secs) (secs) RPF Neighbor Flags
--------- --------- ----------- ----------- ------------ -----