CLI Reference Guide

374 QoS Commands
www.dell.com | support.dell.com
User Guidelines
Only one style of police command (simple) is allowed for a given class instance in a particular
policy.
Example
The following example shows how to establish the traffic policing style for the specified class.
console(config-policy-classmap)#police-simple 33 34 conform-action
transmit violate-action transmit
policy-map
Use the policy-map command in Global Configuration mode to establish a new DiffServ policy. To
remove the policy, use the
no form of this command.
Syntax
policy-map policyname [ in ]
no policy-map policyname
• policyname —Specifies the DiffServ policy name as a unique case-sensitive alphanumeric
string of characters. (Range: 1 - 31 alphanumeric characters.)
•
in —Inbound direction. Must be specified for new DiffServ policies. Not specified for
existing DiffServ policies. A new policy can be specified with "in" only. An existing policy
can be entered without "in" only.
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode
User Guidelines
The CLI mode is changed to Policy-Class-Map Configuration when this command is
successfully executed.
The policy type dictates which of the individual policy attribute commands are valid within
the policy definition.
Example
The following example shows how to establish a new DiffServ policy named "DELL."
console(config)#policy-map DELL
console(config-policy-classmap)#