CLI Reference Guide

802.1x Commands 329
Command Mode
Interface Configuration (VLAN) mode
User Guidelines
Use the dot1x guest-vlan enable command in Interface Configuration mode to enable
unauthorized users on an interface access to the guest VLAN. If the guest VLAN is defined
and enabled, the port joins the guest VLAN automatically when the port is unauthorized and
leaves the guest VLAN when the port becomes authorized. To make sure this function works,
ensure that the port is not a member in the guest VLAN
statically .
Example
The following example shows how to access the Guest VLAN.
console(config-if-vlan1)#dot1x guest-vlan
dot1x guest-vlan enable
Use the dot1x guest-vlan enable command in Interface Configuration mode to enable
unauthorized users on the interface an access to the guest VLAN. To disable the access, use the
no
form of this command.
Syntax
dot1x guest-vlan enable
no dot1x guest-vlan enable
Default Configuration
No Guest VLAN is enabled on the interface.
Command Mode
Interface Configuration (Ethernet) mode
User Guidelines
The switch has one global guest VLAN defined by the dot1x guest-vlan Interface VLAN
configuration command.
Example
The following example displays how to enable unauthorized users.
console(config-if-1/g3)#dot1x guest-vlan enable