Users Guide

To place no limit on the number of fragments allowed, use the no ip max-frag-

count command.

Parameters

count Enter a number for the number of fragments allowed for re-

assembly. The range is from 2 to 256.

Defaults No limit is set on number of fragments allowed.

Command Modes CONFIGURATION

Supported Modes Full–Switch

Command History

Version Description

9.9(0.0) Introduced on the FN IOM.

8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.

Usage Information To avoid denial of service (DOS) attacks, keep the number of fragments allowed for re-

assembly low.

ip name-server

Enter up to six IPv4 addresses of name servers. The order you enter the addresses determines the order of

their use.

Syntax

ip name-server ipv4-address [ipv4-address2...ipv4-address6]

To remove a name server, use the no ip name-server ip-address command.

Parameters

ipv4-address Enter the IPv4 address, in dotted decimal format, of the name

server to be used.

ipv4-address2...

ipv4-address6

(OPTIONAL) Enter up five more IPv4 addresses, in dotted

decimal format, of name servers to be used. Separate the

addresses with a space.