Users Guide

Parameters
community (OPTIONAL) Enter the keyword community to display VLANs
configured as community VLANs, along with their interfaces.
interface (OPTIONAL) Enter the keyword interface to display VLANs
configured as community VLANs, along with their interfaces.
isolated (OPTIONAL) Enter the keyword isolated to display VLANs
configured as isolated VLANs, along with their interfaces.
primary (OPTIONAL) Enter the keyword primary to display VLANs
configured as primary VLANs, along with their interfaces.
primary_vlan (OPTIONAL) Enter a private VLAN ID or secondary VLAN ID to
display interface details about the designated PVLAN.
interface interface (OPTIONAL) Enter the keyword interface and an interface ID
to display the PVLAN configuration of the designated interface.
Defaults none
Command Modes
• EXEC
• EXEC Privilege
Supported Modes Full—Switch
Command History
Version Description
9.9(0.0) Introduced on the FN IOM.
8.3.16.1 Introduced on the MXL 10/40GbE Switch IO Module.
Usage Information
Examples of all types of command output are shown below. The first type of output is
the result of not entering an optional keyword. It displays a detailed list of all PVLANs
and their member VLANs and interfaces. The other types of output show details about
PVLAN subsets.
The following describes the show private-vlan command shown in the Examples
below.
Field Description
Primary Displays the VLAN ID of the designated or associated primary
VLAN(s).
Secondary Displays the VLAN ID of the designated or associated secondary
VLAN(s).
Type Displays the type of VLAN in which the listed interfaces reside.
Active States whether the interface is operationally up or down.
Ports Displays the interface IDs in the listed VLAN.
Private VLAN (PVLAN) 1239