Reference Guide

Field Description
Oper-State Operational status of link to the fabric: Up (link is up and transmitting FC trac),
Down (link is down and not transmitting FC trac), Link-wait (link is up and waiting
for FLOGI to complete on peer FC port), or Removed (port has been shut down).
Members FN2210S Aggregator with the FC Flex IO module Ethernet and FC ports that are
members of the dedicated FCoE VLAN that carries storage trac to the specied
fabric.
Example
Dell#show fcoe-map brief
Fabric-Name Fabric-Id Vlan-Id FC-MAP FCF-Priority Config-State Oper-
State
test 16 16 0efc02 128 ACTIVE UP
cnatest 1003 1003 0efc03 128 ACTIVE UP
sitest 1004 1004 0efc04 128 ACTIVE DOWN
Dell#show fcoe-map si
Fabric Name si
Fabric Id 1004
Vlan Id 1004
Vlan priority 3
FC-MAP 0efc04
FKA-ADV-Period 8
Fcf Priority 128
Config-State ACTIVE
Oper-State DOWN
Members
Related Commands
fcoe-map — creates an FCoE map which contains the parameters used in the communication between
servers and a SAN fabric.
show fc sw
Display the switch conguration for Fibre Channel capability.
Syntax
show fc sw
Command Modes
• EXEC
• EXEC Privilege
Supported Modes All modes
Command History
Version Description
9.6(0.0) Supported on the FN2210S Aggregator.
9.3(0.0) Introduced on the M I/O Aggregator and MXL 10/40GbE Switch with the FC Flex
IO module.
Example
Dell(conf)#do show fc sw
Switch Mode : NPG
Switch WWN : 10:00:00:1e:c9:f1:00:d7
246