Users Guide
Viewing prole log
To view the prole log, in the Server Proles page, see the Recent Prole Log section. This section lists the 10 latest prole log entries
directly from server cloning operations. Each log entry displays the severity, the time and date of submission of the server conguration
replication operation, and the replication log message description. The log entries are also available in the RAC log. To view the other
available entries, click Go to Prole Log. The Prole Log page is displayed. For more information, see the Online Help.
Completion status and troubleshooting
To check the completion status of an applied BIOS prole:
1 In the left pane, click Chassis Overview > Server Overview > Setup > Proles.
2 On the Server Proles page, note down the Job ID (JID) of the submitted job from the Recent Prole Log section.
3 In the left pane, click Server Overview > Troubleshooting > Lifecycle Controller Jobs. Search for the same JID in the Jobs table. For
more information about performing Lifecycle Controller jobs using CMC, see Lifecycle Controller Job Operations.
4 Click View Log link to view the results of Lclogview from the iDRAC Lifecycle Controller for the specic server.
The results displayed for the completion or failure are similar to the information displayed in the iDRAC Lifecycle Controller log for the
specic server.
Quick Deploy of proles
The Quick Deploy feature enables you to assign a stored prole to a server slot. Any server supporting server conguration replication that
is inserted into a slot is congured using the prole assigned to that slot. You can perform the Quick Deploy action only if the Action When
Server is Inserted option in the Deploy iDRAC page is set to Server Prole or Quick Deploy and Server Prole. Selecting this option
allows to apply the server prole assigned when a new server is inserted in the chassis. To go to the Deploy iDRAC page, select Server
Overview
> Setup > iDRAC . Proles that can be deployed are contained in the SD card.
NOTE
: To set up the proles for quick deploy, you must have Chassis Administrator privileges.
Assigning server proles to slots
The Server Proles page enables you to assign server proles to slots. To assign a prole to the chassis slots:
1 In the Server Proles page, click Proles for QuickDeploy section.
The current prole assignments are displayed for the slots in the select boxes contained in the Assign Prole column.
NOTE
: You can perform the Quick Deploy action only if the Action When Server is Inserted option in the Deploy iDRAC page
is set to Server Prole or Quick Deploy then Server Prole. Selecting this option allows you to apply the server prole
assigned when a new server is inserted in the chassis.
2 From the drop-down menu, select the prole to assign to the required slot. You can select proles to apply to multiple slots.
3 Click Assign Prole.
The prole gets applied to the selected slots.
NOTE
: When the FM120x4 sled is inserted, the stored prole assigned to the server slot is applied to all the four servers.
94 Conguring servers