Owners Manual

Results
Figure 11. Removing the cooling shroud retention bar
1. screw (9)
2. cooling shroud retention bar
3. standoff (2)
Next steps
1. Install the cooling shroud retention bar.
2. Follow the procedure listed in the After working inside your system section.
Related references
Safety instructions on page 48
Related tasks
Before working inside your system on page 48
Removing the sled on page 49
Installing the cooling shroud retention bar on page 56
After working inside your system on page 49
Installing the cooling shroud retention bar
Prerequisites
CAUTION:
Many repairs may only be done by a certified service technician. You should only perform
troubleshooting and simple repairs as authorized in your product documentation, or as directed by the online or
telephone service and support team. Damage due to servicing that is not authorized by Dell is not covered by
your warranty. Read and follow the safety instructions that came with the product.
1. Follow the safety guidelines listed in the Safety instructions section.
2. Follow the procedure listed in the Before working inside your system section.
3. Keep the #1 and #2 Phillips screwdrivers ready.
4. Remove the cooling shroud retention bar.
56
Installing and removing sled components