CLI Guide

Legal Values
• 1 (TRUE)
• 0 (FALSE)
Default
0
cfgNetTuning
This group enables users to configure the advanced network interface parameters for the RAC NIC. When configured, the updated
settings may take up to a minute to become active.
This group enables users to configure the advanced network interface parameters. When configured, the updated settings may take up to
a minute to become active.
NOTE: This group is applicable only for iDRAC on Rack and Tower Servers and not for iDRAC Enterprise on Blade
Servers.
CAUTION: Use extra precaution when modifying properties in this group. Inappropriate modification of the properties in
this group can result in your RAC NIC become inoperable.
The following sections provide information about the objects in the cfgNetTuning group.
cfgNetTuningNicAutoneg (Read or Write)
Table 352. Details of cfgNetTuningNicAutoneg attribute
Description
Enables auto negotiation of physical link speed and duplex. If enabled, auto negotiation takes priority over other
values set in this group.
Legal Values
• 0 = Auto Negotiation is Disabled
• 1 = Auto Negotiation is Enabled
Default
1
Example
racadm getconfig -g cfgNetTuning
cfgNetTuningNicSpeed=100
cfgNetTuningNicFullDuplex=1
cfgNetTuningNicMtu=1500
cfgNetTuningNicAutoneg=1
cfgNetTuningNic100MB (Read or Write)
Table 353. Details of cfgNetTuningNic100MB
Description
Specifies the speed for iDRAC NIC.
NOTE: To set this property:
• iDRAC NIC selection must be set to Dedicated mode.
• iDRAC NIC Auto negotiation must be disabled.
• iDRAC IPv4 must be enabled.
• iDRAC IPv4 DHCP must be enabled.
• iDRAC IPv6 must be enabled.
• iDRAC IPv6 auto configuration must be enabled.
Legal Values
• 0 (10 MBit)
220 iDRAC Property Database Group and Object Descriptions