CLI Guide
• Generate a comparison report using about the available updates in the repository.
racadm update -f Catalog.xml -l 192.168.11.10:/Repo -t NFS -a FALSE --
verifycatalog
• Perform update from an FTP repository and reboot the server to apply the updates.
racadm update -f Catalog.xml -e 192.168.11.10/Repo/MyCatalog -a TRUE -t FTP
• Perform update from an FTP repository with authentication and reboot the server to apply the updates.
racadm update -f Catalog.xml -e 192.168.11.10/Repo/MyCatalog -u user -p
mypass -a TRUE -t FTP
• Perform update from an HTTP repository and reboot the server to apply the updates.
racadm update -f Catalog.xml -e 192.168.11.10/Repo/MyCatalog -a TRUE -t HTTP
• Perform update from a TFTP repository and reboot the server to apply the updates.
racadm update -f Catalog.xml -e 192.168.11.10/Repo/MyCatalog -a TRUE -t TFTP
• Perform update from an FTP repository through a proxy server.
racadm update -f Catalog.xml -e 192.168.11.10/Repo/MyCatalog -a TRUE -ph
145.140.12.56 -pu prxyuser -pp prxypass -po 80 -pt http -t FTP
• Perform update from ftp.dell.com
racadm update -f Catalog.xml.gz -e ftp.dell.com/Catalog -a TRUE -t FTP
• View the comparison report generated when --verifycatalog is used.
racadm update viewreport
• View the comparison report generated.
racadm update viewreport
ComponentType = Firmware
ElementName = PERC H730P Mini
FQDD = RAID.Integrated.1-1
Current Version = 25.2.1.0025
Available Version = 25.2.1.0029
usercertupload
Table 106. Details of usercertupload
Description Uploads a user certificate or a user CA certificate from the client to iDRAC.
To run this subcommand, you must have the Configure iDRAC permission.
NOTE: This option is only supported on the remote interface (s).
Synopsis
racadm usercertupload -t <type> [-f <filename>] -i <index>
Input
• -t — Specifies the type of certificate to upload, either the CA certificate or server certificate.
• 1=user certificate
• 2=user CA certificate
• -f — Specifies the filename of the certificate that must be uploaded. If the file is not specified, the sslcert
file in the current directory is selected.
•
-i — Index number of the user. Valid values 2–16.
150 RACADM Subcommand Details