Owner's manual

8 Installation Guide
6 Align the right air baffle with the screw holes on the front of the sled cover.
7 Secure the right air baffle to the sled cover using the two M3 screws. Tighten the screws to
5.21 in-lbs.
Figure 1-4. Installing the Right Air Baffle
8 Remove the four screws securing the MIC card bracket.
9 Lift the bracket from the MIC card. Save the bracket for future use.
Figure 1-5. Removing the MIC Card Bracket
1 M3 screws (2) 2 right air baffle
1 screws (4) 2 MIC card bracket
3MIC card
1
2
1
2
3
C8220X_MIC5110P7120P_IG.book Page 8 Monday, August 12, 2013 5:42 PM