Installation Manual

6
Information You May Need
For information about system features, troubleshooting, and component replacement, see the
PowerEdge C8220X Hardware Owner’s Manual. This document is available at
dell.com/support/manuals.
Tesla K10 GPGPU Cards
1 Remove the sled from the PowerEdge C8000 server enclosure. For detailed information on
removing the sled, see the
PowerEdge C8220X Hardware Owner’s Manual .
2 Place the sled on a flat, stable surface.
3 Open the sled. For detailed information on opening the sled, see the PowerEdge C8220X
Hardware Owner’s Manual
.
4 Remove the five M3 screws securing the top cover.
5 Lift the top cover away from the sled cover.
Figure 1-1. Removing the Top Cover
1 top cover 2 M3 screws (5)
1
2