Manualshelf

Installation Manual

ManualsBrandsDell ManualsComputer HardwarePowerEdge C8000
12345678910
10
14
Align the left air baffle with the screw holes on the front of the sled cover.
15
Secure the left air baffle to the sled cover using the two M3 screws. Tighten the screws to
5.21 in-lbs.
16
Route the emergency throttling cable through the cable guide on top of the air baffle.
Figure 1-8. Installing the Left Air Baffle
Installing the Back Tesla K10 GPGPU card
1
Release the cables from the retaining clips and slightly lift the cables to access the screws on
the sled cover.
Figure 1-9. Releasing the Power and Emergency Throttling Cables
1 left air baffle 2 M3 screws (2)
3 Tesla K10 GPGPU card assembly 4 emergency throttling cable
1 power and emergency throttling cables
1