Manual

104 Using the System Setup Program
00BB Embedded NIC2 Enables the onboard NIC2 controller, but disables the
NIC associated PXE or RPL boot-ROM.
00BC Embedded NIC2 Enables the onboard NIC2 controller (full-function),
including its PXE boot-ROM.
00BF Remote Access Disables serial console redirection.
00C0 Serial port
number
Enables console redirection via COM1. See token
D7h.
00C1 Power Button Enables the power button to turn off the system
power. (default)
00C2 Power Button Disables the power button to turn off the system
power.
00D1 Hyper-Threading
Technology
Enables Hyper-Threading Technology.
00D2 Hyper-Threading
Technology
Disables Hyper-Threading Technology.
00D7 Serial port
number
Enables console redirection via COM2.
00D8 Load Optimal
Defaults
Install optimal default settings for all the items in the
Setup utility on the next boot.
00FE Legacy USB
Support
Disables the system to provide legacy USB support for
the operating system.
00FF Legacy USB
Support
Enables the system to provide legacy USB support for
the operating system.
0117 SATA Port0 Turns off the 1st Serial ATA drive controller.
0118 SATA Port0 Enables BIOS support for the 1st Serial ATA drive
controller (enabled if present, POST error appears if
not present).
0119 SATA Port1 Turns off the 2nd Serial ATA drive controller.
011A SATA Port1 Enables BIOS support for the 2nd Serial ATA drive
controller (enabled if present, POST error appears if
not present).
Table 2-1. D4 Token Table
(continued)
Token Setup Option Description