Owners Manual

Item Indicator, button or connector Icon Description

Power-on indicator or system state

indicator or power button for system

board 3

NOTE: When turning on the system, the video

monitor can take from several seconds to over two

minutes to display an image, depending on the

number and capacity of DIMMs installed in the

system.

NOTE: On ACPI-compliant operating systems

(OSs), turning o the system by using the power

button causes the system to perform a graceful

shutdown before power to the system is turned o.

NOTE: To force an ungraceful shutdown, press and

hold the power button for 5 seconds.

2 System identication indicator or button

for system board 1

The identication button can be used to locate a particular

system and system board within a chassis. When the button

is pushed, the blue status indicator of the system on the

front and rear blinks until the button is pushed again.

4 System identication indicator or button

for system board 2

6 System identication indicator or button

for system board 4

8 System identication indicator or button

for system board 3

5 Hard drives

Up to 12 hot swappable 3.5-inch hard drives.

Up to 24 hot swappable 2.5-inch hard drives.

* Drive cover Applicable only for 2.5-inch hard drive systems. This is not a

usable drive slot.

Hard drive indicator patterns

Figure 4. 3.5-inch hard drive indicators

hard drive activity indicator (green) 2 hard drive status indicator (green and amber)

Dell PowerEdge C6320 product overview 11