Owners Manual
Figure 60. Replacing the system battery
1 system battery 2 negative side of battery connector
3 battery latch
Next steps
1 Replace the system board assembly.
2 Reconnect the system to the electrical outlet.
3 Turn on the system, including any attached peripherals.
4 Enter System Setup to conrm that the battery is operating properly. See the System setup section.
5 In System Setup, enter correct time and date in the Time and Date elds.
6 Exit System Setup.
Related links
Safety instructions
Removing the system board assembly
Removing the cooling shroud
Removing the expansion card
Installing the system board assembly
System Setup
System board
Removing a system board
Prerequisites
CAUTION
: Many repairs may only be done by a certied service technician. You should only perform troubleshooting and simple
repairs as authorized in your product documentation, or as directed by the online or telephone service and support team.
Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that are shipped with your product.
Installing and removing system components 109