Owners Manual
Figure 56. Removing and installing the mezzanine card bridge board
1 system board assembly 2 mezzanine card bridge board
Related links
Safety instructions
Removing the system board assembly
Removing the optional LSI 2008 SAS mezzanine card
Removing the 1GbE mezzanine card
Removing the 10GbE mezzanine card
Installing the mezzanine card bridge board
Prerequisite
CAUTION
: Many repairs may only be done by a certied service technician. You should only perform troubleshooting and simple
repairs as authorized in your product documentation, or as directed by the online or telephone service and support team.
Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that are shipped with your product.
Follow the safety guidelines listed in the Safety instructions section.
Step
Install the mezzanine card bridge board into the mezzanine slot on the system board.
Next steps
1 Install the mezzanine card.
2 Install the system board assembly.
3 Reconnect the peripherals and connect the system to the electrical outlet.
4 Turn on the system, including any attached peripherals.
Installing and removing system components
103