Manual

Problem
l Fan not operating
l Server management application program issues a fan-related error message
Action
1. Turn off the system, including any attached peripherals, and disconnect all the power cables from the electrical outlets.
2. Remove the system cover (see "Removing the System Cover and Support Beam").
3. Check the fan cable connection to the SYS_FAN2 connector on the system board.
If the problem is not resolved, see "Getting Help," for instructions on obtaining technical assistance.
Troubleshooting Expansion Cards
Problem
l Error message indicates an expansion-card problem
l Expansion card seems to perform incorrectly or not at all
Action
1. Turn off the system, including any attached peripherals, and disconnect all the power cables from the electrical outlets.
2. Remove the system cover (see "Removing the System Cover and Support Beam").
3. Verify that each expansion card is firmly seated in its connector.
4. Verify that any appropriate cables are firmly connected to their corresponding connectors on the expansion cards.
5. Install the system cover.
6. Connect the system to an electrical outlet and turn on the system. If the problem still exists, go to step 7.
7. Turn off the system and disconnect the system from its electrical outlet.
8. Remove the system cover.
9. Remove all expansion cards installed in the system.
10. Install the system cover.
11. Connect the system to an electrical outlet and turn on the system.
12. Run the system memory tests in the system diagnostics.
If the tests do not complete successfully, see "Getting Help," for information on obtaining technical assistance.
13. Reinstall one of the expansion cards you removed in step 9 (see "Installing Expansion Cards" in Installing System Board Options").
14. Replace the system cover, reconnect the system to the electrical outlet, and turn on the system.
If the problem still exists, repeat steps 13 and 14 for each of the remaining expansion cards.
If you have reinstalled all of the expansion cards and the system memory tests are still failing, see "Getting Help," for information on obtaining technical
assistance.
Troubleshooting System Memory
Problem
l Faulty memory module
l Faulty system board
Action
1. Turn on the power to the system, including any attached peripherals.
If there is not an error message, go to step 4.
2. Enter the System Setup program to check the system memory setting.
See "Using the System Setup Program," in the User's Guide for instructions.
3. Iftheamountofmemoryinstalleddoesmatchthesystemmemorysetting,gotostep8.
4. Turn off the system, including any attached peripherals, and disconnect the system from its electrical outlet.