Release Notes

32 System Firmware Version 5.1.1.7
Switch CLI help
does not locate
the 'initiate
failover'
command
properly
Warning message printed during execution
of the deprecated "movemanagement"
command incorrectly
states that "initiate failover" command is
executed from privileged EXEC mode
whereas it's available from stack config
mode only.
Corrected the warning message All 4.2 supported
platforms
Timeout during
SNMP walk on
root
SNMP walk on root ends with timeout
Corrected delay that caused
timeout.
All 4.2 supported
platforms
"show interfaces
switchport"
command shows
incorrect
General Mode
Tagged VLANs
value
"show interfaces switchport" command
shows incorrect General Mode Tagged
VLANs value.
Corrected the display of the
General Mode Tagged VLANs
value.
All 4.2 supported
platforms
Error while
adding an
access-list to an
access-group
Error message when trying to apply ACLs
to VLANs.
Corrected the condition that
resulted in the error.
PC8024
PCM8024
PCM8024-k
Walk of
agentDaiVlanSt
atsTable returns
statistics for all
the 4096
VLANs
Walk of agentDaiVlanStatsTable returns
statistics for all the 4096 VLANs even they
do not exist in the system
Corrected the VLAN Stats
Table data.
All 4.2 supported
platforms
OOB interface
configured with
default IP via
Setup Wizard
though not to do
so
When the Setup Wizard is used the OOB
interface IP address is incorrectly set to
192.168.2.1 static IP by default
Corrected the setting of the
OOB interface IP address.
All 4.2 supported
platforms
Unable to create
VLAN ID and
name VLAN in
Web GUI
Unable to create new VLAN with its name
using the Web GUI
Corrected the VLAN creation
GUI
All 4.2 supported
platforms
"Failed to get
CPU cosq 0
drop counters,
error -16"
messages in logs
"Failed to get CPU cosq 0 drop counters,
error -16" messages in logs
Corrected the retrieval of cosq
0 counters.
All 4.2 supported
platforms
Default "ip
address dhcp"
command on
VLAN 1
causing "failed
to bind socket"
error repeatedly
Default "ip address dhcp" command on
VLAN 1 causing "failed to bind socket"
error repeatedly
Corrected DHCP socket
problem.
All 4.2 supported
platforms
agentPortSpeed
DuplexStatus
SNMP MIB
object
documentation
error
Mistakes in the
agentPortSpeedDuplexStatus SNMP MIB
object description
Corrected MIB object
description.
All 4.2 supported
platforms
ifIndiscards is
still counting
VLAN discards
if the interface
switchport mode
is in trunk mode
ifIndiscards is still counting VLAN discards
if the interface switchport mode is in trunk
mode (acceptable frame type is all)
Corrected ifIndiscards counter
collection.
All 4.2 supported
platforms