Reference Guide

762 Spanning Tree Commands
Example
The following example enables spanning-tree functionality on gigabit
ethernet interface 4/0/1.
console#config
console(config)#interface gigabitethernet 4/0/1
console(config-if-4/0/1)#spanning-tree auto-portfast
spanning-tree bpdu flooding
The spanning-tree bpdu flooding command allows flooding of BPDUs
received on non-spanning-tree ports to all other non-spanning-tree ports. Use
the “no” form of the command to disable flooding.
Syntax
spanning-tree bpdu flooding
no spanning-tree bpdu flooding
Default Configuration
This feature is disabled by default.
Command Mode
Global Configuration mode
Usage Guidelines
There are no usage guidelines for this command.
Example
console#spanning-tree bpdu flooding
spanning-tree bpdu-protection
Use the spanning-tree bpdu-protection command in Global Configuration
mode to enable BPDU protection on a switch. Use the no form of this
command to resume the default status of BPDU protection function.
2CSPC4.XModular-SWUM204.book Page 762 Friday, March 15, 2013 9:24 AM