Reference Guide

RADIUS Commands 721
aaa accounting dot1x default start-stop
The aaa accounting network default start-stop group radius command has
been migrated to the aaa accounting dot1x default start-stop {radius|none}
command. Use the aaa accounting dot1x default start-stop command in
Global Config mode to create an accounting method list.
Use the no form of the command to delete a list. A list may be identified by
the default keyword or a user-specified listname.
Use either the aaa accounting dot1x default none or no aaa accounting
dot1x default command to disable dot1x accounting.
Syntax
aaa accounting dot1x default start-stop {radius|none }
no aaa accounting dot1x default
aaa accounting dot1x default none
aaa accounting {exec|commands} {<listname>|default} {none|start-
stop|stop-only} {radius|tacacs|radius tacacs|tacacs radius}
no aaa accounting {exec|commands} {default|list}
Parameter Description
Parameter Description
commands Perform accounting on all user executed commands (TACACS
only).
exec Perform accounting on EXEC terminal sessions.
listname The name of an Accounting Method List. The list name can
consist of any printable character. Use quotes around the list
name if embedded blanks are contained in the list name.
none Disable issuing accounting notices for the specified list.
2CSPC4.XModular-SWUM204.book Page 721 Friday, March 15, 2013 9:24 AM