Reference Guide

QoS Commands 657
class-map
Use the class-map command in Global Configuration mode to define a new
DiffServ class of type
match-all . To delete the existing class, use the no form
of this command.
Syntax
class-map match-all class-map-name [{ipv4 | ipv6}]
no class-map match-all
class-map-name
• class-map-name — a case-sensitive alphanumeric string from 1 to 31
characters uniquely identifying an existing DiffServ class.
Default Configuration
The class-map defaults to ipv4.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Example
The following example creates a class-map named "DELL" which requires all
ACE’s to be matched.
console(config)#class-map DELL
console(config-cmap)#
class-map rename
Use the class-map rename command in Global Configuration mode to
change the name of a DiffServ class.
Syntax
class-map rename classname newclassname
2CSPC4.XModular-SWUM204.book Page 657 Friday, March 15, 2013 9:24 AM