Reference Guide

610 Multicast VLAN Registration Commands
Syntax
show mvr members [ A.B.C.D ]
Parameter Description
The parameter is a valid multicast address in IPv4 dotted notation. The
following table explains the output parameters.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC, Config mode and all Config sub-modes
User Guidelines
The following table lists the completion messages.
Examples
console#show mvr members
MVR Group IP Status Members
------------------ --------------- ---------------------
224.1.1.1 INACTIVE 1/0/1, 1/0/2, 1/0/3
Parameter Description
MVR Group IP MVR group multicast IP address.
Status The status of the specific MVR group. It can
be active or inactive.
Members The list of ports which participates in the
specific MVR group.
Message Type Message Description
Successful Completion Message None
Error Completion Message MVR disabled
2CSPC4.XModular-SWUM204.book Page 610 Friday, March 15, 2013 9:24 AM