Reference Guide

LLDP Commands 585
console# show lldp interface 1/0/1
Interface Link Transmit Receive Notify TLVs Mgmt
--------- ---- -------- -------- -------- ------- ----
1/0/1 Up Enabled Enabled Enabled 0,1,2,3 Y
TLV Codes: 0 – Port Description, 1 – System Name, 2 – System
Description, 3 – System Capability
show lldp local-device
Use the show lldp local-device command in Privileged EXEC mode to display
the advertised LLDP local data. This command can display summary
information or detail for each interface.
Syntax
show lldp local-device {detail interface | interface | all}
• detail — includes a detailed version of remote data.
•
interface — Specifies a valid physical interface on the device. Specify
either
gigabitethernet unit/slot/port or tengigabitethernet unit/slot/port.
•
all — Shows lldp local device information on all interfaces.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode, Config mode and all Config sub-modes
User Guidelines
This command has no user guidelines.
Examples
These examples show advertised LLDP local data in two levels of detail.
console#show lldp local-device all
LLDP Local Device Summary
2CSPC4.XModular-SWUM204.book Page 585 Friday, March 15, 2013 9:24 AM