Reference Guide

IP Addressing Commands 509
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode, Config mode and all Config sub-modes
User Guidelines
This command has no user guidelines.
Example
The following example displays information about IP hosts.
console>show hosts
Host name:
Default domain: gm.com, sales.gm.com, usa.sales.gm.com
Name/address lookup is enabled
Name servers (Preference order): 176.16.1.18 176.16.1.19
Configured host name-to-address mapping:
Host Addresses
-------------------------- ----------------------------
accounting.gm.com 176.16.8.8
Cache: TTL (Hours)
Host Total Elapsed Type Addresses
---------------- ----- ------- ------- -------------
www.stanford.edu 72 3 IP 171.64.14.203
show ip address-conflict
Use the show ip address-conflict command in User EXEC or Privileged
EXEC mode to display the status information corresponding to the last
detected address conflict.
Syntax
show ip address-conflict
Parameter Description
This command does not require a parameter description.
2CSPC4.XModular-SWUM204.book Page 509 Friday, March 15, 2013 9:24 AM