Reference Guide

IGMP Snooping Commands 481
• time — IGMP group membership interval time in seconds. (Range:
2–3600)
Default Configuration
The default group membership interval time is 260 seconds.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example configures an IGMP snooping group membership
interval of 1500 seconds on VLAN 2.
console(config)#ip igmp snooping vlan 2 groupmembership-interval 1500
ip igmp snooping vlan last-member-query-
interval
This command sets the last-member-query interval on a particular VLAN.
The last-member-query-interval is the amount of time in seconds after which
a host is considered to have left the group. This value must be less than the
IGMP Query Interval time value. The range is 1 to 25 seconds. The no form
of this command sets the last-member-query-interval on the VLAN to the
default value.
Syntax
ip igmp snooping vlan vlan-id last-member-query-interval time
no ip igmp snooping vlan vlan-id last-member-query-interval time
• vlan-id — Number assigned to the VLAN.
•
time — Number of seconds after which a host is considered to have left
the group. (Range: 1-25)
2CSPC4.XModular-SWUM204.book Page 481 Friday, March 15, 2013 9:24 AM