Reference Guide

428 Ethernet Configuration Commands
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode, Config mode and all Config sub-modes
User Guidelines
Port channels are only displayed if configured. Use the show interfaces port-
channel
command to display configured and unconfigured port channels.
Interfaces configured as stacking ports will show as detached in the output of
the
show interfaces status command.
Example
The following example displays the status for all configured interfaces.
console#show interfaces status
Port Description Duplex Speed Neg Link Flow Control
State Status
------- -------------- ------ ------- ---- ----- ------------
Tel/0/1 N/A Unknown Auto Down Inactive
Tel/0/2 N/A Unknown Auto Down Inactive
Tel/0/3 phone port N/A Unknown Auto Down Inactive
show statistics
Use the show statistics command in Privileged EXEC mode to display
detailed statistics for a specific port or for the entire switch.
Syntax
show statistics {gigabitethernet unit/slot/port |switchport | port-channel
port-channel-number | tengigabitethernet unit/slot/port }
2CSPC4.XModular-SWUM204.book Page 428 Friday, March 15, 2013 9:24 AM