Reference Guide

424 Ethernet Configuration Commands
show interfaces description
Use the show interfaces description command in User EXEC mode to
display the description for all configured interfaces.
Syntax
show interfaces description [gigabitethernet unit/slot/port | port-channel
port-channel-number | tengigabitethernet unit/slot/port ]
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode, Config mode and all Config sub-modes
User Guidelines
This command has no user guidelines.
Late Collisions Counted times that a collision is detected later than one
slot time into the transmission of a packet.
Excessive Collisions Counted frames for which transmission fails due to
excessive collisions.
Oversize Packets Counted frames received that exceed the maximum
permitted frame size.
Internal MAC Rx Errors A count of frames for which reception fails due to an
internal MAC sublayer receive error.
Received Pause Frames A count of MAC Control frames received with an opcode
indicating the PAUSE operation.
Trans mit ted Pause
Frames
Counted MAC Control frames transmitted on this
interface with an opcode indicating the PAUSE operation.
Received PFC Frames A count of the received Priority Flow Control (PFC)
frames.
Trans mit ted P FC
Frames
A count of the transmitted PFC frames.
Field Description
2CSPC4.XModular-SWUM204.book Page 424 Friday, March 15, 2013 9:24 AM