Reference Guide
396 E-mail Alerting Commands
logging email urgent
Use the logging email urgent command in Global Configuration mode to set
the lowest severity level at which log messages are e-mailed in an urgent
manner. To revert the urgent severity level to its default value, use the no
form of this command.
Syntax
logging email urgent {
severity
| none}
no logging email urgent
Parameter Description
Default Configuration
The default severity level is alert.
Parameter Description
severity Log messages at or above this severity level are e-mailed
immediately. The severity level may either be specified by
keyword or as an integer from 0 to 7. The accepted keywords,
and the numeric severity level each represents, are as follows.
•emergency (0)
•alert (1)
•critical (2)
•error (3)
• warning (4)
•notice (5)
•info (6)
•debug (7)
none If you specify this keyword, no log messages are e-mailed
urgently. All log messages at or above the non-urgent level
(configured with the logging email command) are e-mailed in
batch.
2CSPC4.XModular-SWUM204.book Page 396 Friday, March 15, 2013 9:24 AM