Reference Guide

AAA Commands 245
Accounting Method Lists
An Accounting Method List (AML) is an ordered list of accounting methods
that can be applied to the accounting types (exec or commands). Accounting
Method Lists are identified by the default keyword or by a user-defined name.
TACACS+ and RADIUS are supported as accounting methods.
TACACS+ accounts all accounting types. RADIUS only accounts exec
sessions.
Access Line Modes
AMLs can be applied to the following access line modes for accounting
purposes:
• Console: This mode is used when user logs in to the switch using serial
console.
• Telnet: This mode is used when user logs in through Telnet.
• SSH: This mode is used when user logs in through SSH.
By default, no accounting is enabled for any line config modes.
The following default Accounting Methods List are available.
The default lists are not applied to any line-configuration modes by default.
Commands in this Chapter
This chapter explains the following commands:
Default List Name Accounting Type Record Type Accounting Method
Default Exec List exec Start-stop TACACS+
Default Command List commands Stop-only TACACS+
aaa authentication dot1x
default
clear (IAS) password (Line
Configuration)
aaa authentication enable enable authentication password (User EXEC)
aaa authentication login enable password show aaa ias-users
2CSPC4.XModular-SWUM204.book Page 245 Friday, March 15, 2013 9:24 AM