Reference Guide

1766 Telnet Server Commands
Commands in this Chapter
This chapter explains the following commands:
ip telnet server disable
The ip telnet server disable command is used to enable/disable the Telnet
service on the switch.
Syntax
ip telnet server disable
no ip telnet server disable
Parameter Ranges
Not applicable
Command Mode
Global Configuration
Usage Guidelines
No specific guidelines.
Default Value
This feature is enabled by default.
Example
console#configure
console(config)#ip telnet server disable
console(config)# no ip telnet server disable
ip telnet server disable show ip telnet
ip telnet port
–
2CSPC4.XModular-SWUM204.book Page 1766 Friday, March 15, 2013 9:24 AM