Reference Guide

1634 SNMP Commands
Syntax
show snmp filters filtername
• filtername — Specifies the name of the filter. (Range: 1-30)
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode, Config mode and all Config sub-modes
User Guidelines
Per RFC 2573, an implicit exclude all filter is present at the beginning of
every filter list. This implicit filter is not shown in the output of this
command.
Example
The following examples display the configuration of filters with and without a
filter name specification.
console # show snmp filters
Name OID Tree Type
------------------- ---------------------------------
user-filter1 1.3.6.1.2.1.1 Included
user-filter1 1.3.6.1.2.1.1.7 Excluded
user-filter2 1.3.6.1.2.1.2.2.1.*.1 Included
console # show snmp filters user-filter1
Name OID Tree Type
------------------- ---------------------------------
user-filter1 1.3.6.1.2.1.1 Included
user-filter1 1.3.6.1.2.1.1.7 Excluded
2CSPC4.XModular-SWUM204.book Page 1634 Friday, March 15, 2013 9:24 AM