Reference Guide

1460 Captive Portal Commands
Configured Locales........................ 1
Authenticated Users....................... 0
show captive-portal configuration interface
Use the show captive-portal configuration interface command to display
information about all interfaces assigned to a captive portal configuration or
about a specific interface assigned to a captive portal configuration.
Syntax
show captive-portal configuration cp-id interface [{gigabitethernet
unit/slot/port| tengigabitethernet unit/slot/port}]
• cp-id —Captive Portal ID.
Default Configuration
There is no default configuration for this command.
Command Mode
Privileged EXEC mode, Config mode and all Config sub-modes
User Guidelines
There are no user guidelines for this command.
Example
console#show captive-portal configuration 1 interface
CP ID..................................... 1
CP Name................................... cp1
Operational Block
Interface Interface Description Status Status
--------- ---------------------------------------- ------------ ---------
1/0/1 Unit: 1 Slot: 0 Port: 1 Gigabit - Level Disabled Blocked
console#show captive-portal configuration 1 interface 1/0/1
CP ID..................................... 1
CP Name................................... cp1
Interface................................. 1/0/1
2CSPC4.XModular-SWUM204.book Page 1460 Friday, March 15, 2013 9:24 AM