Reference Guide

IPv6 Multicast Commands 1207
Default Configuration
There is no default configuration for this command.
Command Mode
User EXEC, Privileged EXEC modes, Config mode and all Config sub-modes
User Guidelines
There are no user guidelines for this command. Field descriptions are shown
in the following table.
Example
console#show ipv6 pim bsr-router
BSR Address...................... 2001:0db8:0:badc::1
BSR Priority.............................. 0
BSR Hash Mask Length...................... 32
C-BSR Advertisement Interval (secs)....... 60
Next Bootstrap message (hh:mm:ss)......... 00:00:02
If no configured/elected BSR’s exist on the router, the following message is
displayed:
No BSR’s exist/learned on this router.
Field Description
BSR Address Address of the BSR
BSR Priority Configured BSR priority
BSR Hash Mask
Length
Configured hash mask length
Next Bootstrap
Message
Remaining time until a BSR message is sent
Next Candidate RP
Advertisement
Time remaining until the next RP advertisement is sent.
2CSPC4.XModular-SWUM204.book Page 1207 Friday, March 15, 2013 9:24 AM