Reference Guide

Multicast Commands 1181
console#show ip mcast mroute detail
show ip mcast mroute group
Use the show ip mcast mroute group command in Privileged EXEC mode to
display the multicast configuration settings such as flags, timer settings,
incoming and outgoing interfaces, RPF neighboring routers, and expiration
times of all the entries in the multicast mroute table containing the
groupipaddr value.
Syntax
show ip mcast mroute group groupipaddr {detail | summary}
• groupipaddr — IP address of the multicast group.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode, Config mode and all Config sub-modes
User Guidelines
This command has no user guidelines.
Example
The following example displays the multicast configuration settings such as
flags, timer settings, incoming and outgoing interfaces.
console#show ip mcast mroute group 224.5.5.5 summary
console#show ip mcast mroute group 224.5.5.5 detail
2CSPC4.XModular-SWUM204.book Page 1181 Friday, March 15, 2013 9:24 AM