Reference Guide

Multicast Commands 1179
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode, Config mode and all Config sub-modes
User Guidelines
This command has no user guidelines.
Example
The following example displays all the configured administrative scoped
multicast boundaries.
console#show ip mcast boundary all
MULTICAST BOUNDARY
Interface Group Ip Mask
-------- ------ ---------------
show ip multicast interface
Use the show ip multicast interface command in Privileged EXEC mode to
display the multicast information for the specified interface.
Syntax
show ip multicast interface [type number]
Syntax Description
Default Configuration
Show information for all multicast interfaces.
Parameter Description
type number Interface type and number for which to display IP multicast
information. VLAN Vlan-ID is the only supported type and
number
2CSPC4.XModular-SWUM204.book Page 1179 Friday, March 15, 2013 9:24 AM