Reference Guide

1174 Multicast Commands
Example
console(if-vlan10)#ip pim join-prune-interval 30
ip pim rp-address
Use the ip pim rp-address command in Global Configuration mode to define
the address of a PIM Rendezvous point (RP) for a specific multicast group
range. Use the no form of this command to remove a configured RP. This
command replaces the ip pimsm rp-address command.
Syntax
ip pim rp-address {rp-address group-address group-mask [override]}
no ip pim rp-address {
rp-address group-address group-mask}
Parameter Description
Default Configuration
None —no static multicast groups are configured for an RP.
Command Mode
Global Configuration mode
User Guidelines
There are no user guidelines for this command.
Parameter Description
rp-address The valid IPv4 address for the rendezvous point.
group-address A valid multicast group address to be sourced from the
rendezvous point.
group-mask A mask indicating the range of multicast groups sourced from
the RP
override A flag indicating that the static entry should override
dynamically learned entries for the configured multicast group.
2CSPC4.XModular-SWUM204.book Page 1174 Friday, March 15, 2013 9:24 AM