Reference Guide

1110 IPv6 Routing Commands
console(config)#interface vlan 15
console(config-if-vlan15)#ipv6 enable
ipv6 hop-limit
Use the ipv6 hop-limit command to configure the hop limit used in IPv6
PDUs originated by the router. Use the no form of the command to return
the hop limit to the default setting.
Syntax
ipv6 hop-limit count
no ipv6 hop-limit
Parameter Description
Default Configuration
The default count is 64 hops.
Command Mode
Global Configuration
ipv6 host
The ipv6 host command is used to define static host name-to- ipv6 address
mapping in the host cache.
Syntax
ipv6 host name ipv6-address
no ipv6 host name
• name — Host name.
•
ipv6-address — IPv6 address of the host.
Parameter Description
count The number of hops before the PDU expires (Range 0-255).
2CSPC4.XModular-SWUM204.book Page 1110 Friday, March 15, 2013 9:24 AM