Setup Guide

142 ⡏⼂ ⎆⠻ Ჹ ถ⇛
ΫѐӶ əí 3
᝾⯦ᆖ Ⴓ⯚ Ữ❶⹚ႚ 㣶❶ᣃᝢ᝾ .
Next, an IP address is setup. The IP address is defined on the
default VLAN (VLAN #1), of which all ports are members. This is
the IP address you use to access the CLI, Web interface, or SNMP
interface for the switch.
To setup an IP address:
Please enter the IP address of the device (A.B.C.D):
Please enter the IP subnet mask (A.B.C.D or /nn):
IP ⶖ☦ ₩ IP ▶⊦ᗑ Ṣ✾㔆Ḗ ⰟᲿ㨃ᝢ᝾ . ⪢Ḗ ᥾⩎ IP ⶖ☦ᳶ 192.168.1.100 ⯞ ⰟᲿ㧲ᅺ IP ▶⊦ᗑ Ṣ
✾㔆ᳶ
255.255.255.0 ⯞ ⰟᲿ㨃ᝢ᝾ .
Enter Ḗ ᚞ḟᝢ᝾ .
ΫѐӶ əí 4
᝾⯦ᆖ Ⴓ⯚ Ữ❶⹚ႚ 㣶❶ᣃᝢ᝾ .
Finally, setup the default gateway. Please enter the IP address
of the gateway from which this network is reachable
(e.g. 192.168.1.1):
ዊ→ ᄦⰎ㝒⮂ⰎḖ ⰟᲿ㨃ᝢ᝾ .
Enter Ḗ ᚞ḟᝢ᝾ . ᝾⯦ Ữ❶⹚ႚ 㣶❶ᣃᝢ᝾ ( ⮞⯲ ⪢⫚ ႳⰎ ⰟᲿ㧶 ᅗ⭊ ):
This is the configuration information that has been collected:
SNMP Interface = "Dell Network Manager"@192.168.1.10
User Account setup = admin
Password = **********
Management IP address = 192.168.1.100 255.255.255.0
Default Gateway = 192.168.1.1