Quick Reference Guide

Tunnel 437
Syntax
• tunnel isatap solicitation-interval seconds
• no tunnel isatap solicitation-interval
• seconds — Specify the number of seconds between ISATAP router solicitations messages. (Range:
10 – 3600)
Default Configuration
10 seconds.
Command Mode
Global Configuration mode.
User Guidelines
• This command determines the interval of Router Solicitation messages when there is no active
ISATAP router. When there is an active ISATAP router, the robustness level that is set by the
tunnel
isatap robustness
global configuration command determines the refresh rate.
Example
The following example configures the interval between ISATAP router solicitations messages to 60
seconds.
tunnel isatap robustness
The tunnel isatap robustness Global Configuration mode command configures the number of DNS
Query/Router Solicitation refresh messages that the device sends. Use the no form of this command to
return to default.
Syntax
• tunnel isatap robustness number
• no tunnel isatap robustness
• number — Specify the number of refresh messages. (Range: 1 – 20)
Default Configuration
3 times.
Command Mode
Global Configuration mode.
Console (config)# tunnel isatap solicitation-interval 60
5400_CLI.book Page 437 Wednesday, December 17, 2008 4:33 PM