User's Manual

CLI Commands
The following table summarizes the equivalent CLI commands for items in the Address Table/Static Addresses page.
Example
Console(config)#bridge 1 address 00-e0-29-94-34-de vlan 1 forward ethernet 1/1 delete-on-reset
Console(config)#
Dynamic Addresses
The Dynamic Address lookup table allows you to view the MAC addresses that are currently in the address database. When addresses are in the database,
the packets intended for those addresses are forwarded directly to those ports. You can sort the table by interface, VLAN, and MAC address by selecting the
sort key from the drop-down menu.
The Dynamic Addresses page contains the following options for querying the dynamic MAC address table:
l Interface — Check the option box and select a port or trunk from the drop-down menus.
l MAC Address — Check the option box and type the address in the box provided.
l VLAN — Check the option box and select the appropriate VLAN from the drop-down menu.
l Address Table Sort Key — Select the key from the drop-down menu to sort the displayed table entries.
l Query button — Click this button to execute the query once you have selected the criteria for the query.
CLI Commands
Command
Usage
bridge bridge-group address mac-address vlan vlan-id forward
interface [action]
Maps a static address to a port in a VLAN
The action parameters are:
delete-on-reset: Assignment lasts until
switch is reset
permanent: Assignment is permanent
show bridge bridge-group [interface] [address [mask]] [vlan
vlan-id] [sort {address | vlan | interface}]
Allows you to view classes of entries in the
bridge-forwarding database