User's Manual

a. Install the processor heat sink/fan assembly (see Replacing the Processor Heat Sink/Fan Assembly).

5. Connect the power supply cables to the system board (see System Board Components for connector locations).

6. Connect all front panel cables to the system board (see System Board Components for connector locations).

7. Connect all the data cables from the drives to the system board (see System Board Components for connector locations).

8. Connect any additional cables to the system board as required.

9. Install all expansion cards (see Installing a PCI or PCI Express Card).

10. Slide the optical drive back fully into the drive bay.

11. Check all cable connections throughout the computer chassis to ensure that they are secure. See System Board Components to help identify connectors
on the system board.

12. Follow the procedure in After Working on Your Computer.
Back to Contents Page
