Users Guide

操作顯示器 │ 51
若顯示器不支援特定解析度模式，將顯示以下訊息：
The current input timing is not supported by the monitor display.
Please change your input timing to 2560x1440, 60Hz or any other
monitor listed timing as per the monitor specications.
Dell 24 Monitor
這表示顯示器無法與來自電腦的訊號同步。請參閱Monitor specifications 瞭解本
顯示器可處理的水平與垂直頻率範圍。建議的模式為 2560 x 1440。
DDC/CI 功能停用前，會顯示以下訊息：
The function of adjusting display setting using PC application will be
disabled.
Do you wish to disable DDC/CI function?
Yes
No
Dell 24 Monitor
P2421DC
顯示器進入 Standby Mode（待機模式）時，會出現下列訊息：
Dell P2418HZ
Dell 24 Monitor
Going into Standby mode...
P2421DC
若您按下電源按鈕以外的任何按鈕，則會依據您所選擇的輸入來源，出現下列
訊息：
Dell P2418HZ
Dell 24 Monitor
P2421DC
Press any key on the keyboard or move the mouse to wake it up.
If there is no display, press the monitor button again to select
the correct input source.
?
No HDMI signal from your device.
若未連接 HDMI、DP 或 USB Type-C，將出現以下的漂浮對話框。若保持此狀