Users Guide

54 │ Operating your monitor
Dell P2418HZ
Dell 24 Monitor
No USB Type-C Cable
The display will go into Standby Mode in 4 minutes.
www.dell.com/P2421DC
?
P2421DC
A message is displayed while the cable supporting DP alternate mode is connected
to the monitor under the following conditions:
∞
When Auto Select for USB-C is set to Prompt for Multiple Inputs.
∞
When the DP cable is connected to the monitor.
Dell P2418HZ
Dell 24 Monitor
Switch to USB-C Video Input
P2421DC
Yes
No
The OSD functions only in the normal operation mode. When any button is pressed
in Standby Mode, the following message will be displayed:
Dell P2418HZ
Dell 24 Monitor
P2421DC
Press any key on the keyboard or move the mouse to wake it up.
If there is no display, press the monitor button again to select
the correct input source.
?
No HDMI signal from your device.
Activate the computer and the monitor to gain access to the OSD.
See Troubleshooting for more information.