Owners Manual

a) Stand

b) Back cover

c) System board shield

3. Remove the screw (M2x2.5) that secures the SSD card to the system board [1].

4. Slide and remove the SSD card from the card slot on the system board [2].

5. Remove the thermal pad [3].

NOTE: M.2 PCIe SSD with capacity over 512G (512G/1TB/2TB) must be installed with a thermal pad. M.2 SATA SSD

and M.2 PCIe SSD with 128G and 256G do not require a thermal pad.

Installing the SSD card

1. Replace the thermal pad on the rectangular outline marked on the system board [1].

NOTE:

M.2 PCIe SSD with capacity over 512G (512G/1TB/2TB) must be installed with a thermal pad. M.2 SATA SSD

and M.2 PCIe SSD with 128G and 256G do not require a thermal pad.

2. Insert the SSD card into the card slot on the system board [2].

3. Replace the screw (M2x2.5) that secures the SSD card to the system board [3].

Removing and Installing components